Heavy Haul Trailer & Equipment Finder
Describe the cargo and get the trailer that hauls it for the least money — flatbed, step deck, double drop, RGN, lowboy, multi-axle or hot shot — with deck height, permit status and every other trailer it fits on.
Mention the item and how it loads — e.g. "frozen chicken, 22 pallets", "steel I-beams 60 ft", "wheel loader".
All trailer options
Checked against this cargo. Overall height = deck height + cargo height.| Equipment | Fit | Deck ht | Max cargo (permit) | Overall H | Gross | Rate level | Permit status |
|---|
Which trailer do I need?
The trailer is set by the cargo's height, length, weight and how it loads. The lower the deck, the taller the cargo you can carry before the load becomes over-height — the most common reason a move needs extra permits, pole cars or a longer route. Most states allow 13'6" overall (14' or more in many western states), so cargo height plus deck height is the number to watch.
Flatbed vs. step deck vs. double drop
A flatbed is the cheapest open deck but sits about 5' off the ground, so cargo over about 8'6" tall is over-height. A step deck (drop deck) lowers the main deck to about 3'6", fitting cargo to about 10' tall. A double drop has a well about 2' off the ground between the gooseneck and rear axles, fitting cargo to roughly 11'6"–12', but only inside the well length.
RGN vs. lowboy
An RGN (removable gooseneck) is a lowboy whose neck detaches so equipment can drive on from the front — the standard for excavators, dozers, loaders and other tracked or wheeled machines. A fixed-neck lowboy loads from the rear or by crane. Both come in 3- to 9-axle versions; more axles spread the weight so heavier machines stay within state axle limits.
When you need stretch, multi-axle or a hot shot
Stretch (extendable) trailers carry long steel, beams, poles and precast. Multi-axle RGNs and beam trailers carry the heaviest loads — transformers, large excavators and superloads. A hot shot (pickup and gooseneck) is the fastest, cheapest option for light, small equipment and expedited loads.
Trailer types at a glance
Typical specs; individual trailers vary. "Cargo height before over-height" assumes a 13'6" overall limit.| Trailer | Type | Deck length | Deck height | Max cargo | Cargo height before over-height |
|---|---|---|---|---|---|
| Box truck 26' Small LTL / local deliveries, liftgate available. | Enclosed | 26' | Floor | 10,000 lb | — |
| Dry van 53' Palletized or boxed freight, dock loading. | Enclosed | 52'6" | Floor | 45,000 lb | — |
| Reefer 53' Temperature-controlled freight. | Enclosed | 51'6" | Floor | 43,500 lb | — |
| Conestoga 53' Rolling tarp system — side/crane loading with weather protection. | Enclosed | 52' | Floor | 44,000 lb | — |
| Hot shot 40' gooseneck Lowest-cost option for lighter loads under ~16,500 lb (pickup + 40' gooseneck). | Hot shot | 40' | 3'4" | 16,500 lb | 10'2" |
| Flatbed 48' Steel, lumber, pipe, building materials, short equipment. | Flatbed | 48' | 5' | 52,000 lb | 8'6" |
| Flatbed 53' Longer material loads. | Flatbed | 53' | 5' | 50,000 lb | 8'6" |
| Step deck 48' (lower 38') Taller freight up to ~10' high without permits; ramps for drive-on. | Step deck | 38' | 3'6" | 50,000 lb | 10' |
| Step deck 53' (lower 43') Taller, longer freight. | Step deck | 43' | 3'6" | 48,000 lb | 10' |
| Low pro step deck 48' (lower 38') Lower deck ~6" lower than a standard step deck (3'0" vs 3'6") on 17.5"/19.5" tires — cargo up to ~10'6" stays legal height. | Low profile | 38' | 3' | 47,000 lb | 10'6" |
| Low pro step deck 53' (lower 43') Longer low pro step deck for tall freight up to ~10'6". | Low profile | 43' | 3' | 46,000 lb | 10'6" |
| Stretch flatbed (extends to 80') Beams, poles, trusses, long pipe. | Stretch | 80' | 5' | 46,000 lb | 8'6" |
| 7 axle stretch flatbed (extends to 100') Long and heavy — bridge girders, double tees, precast beams, 80'+ steel. | Stretch | 100' | 5' | 90,000 lb | 8'6" |
| Stretch step deck (lower to 60') Long and tall freight. | Stretch | 60' | 3'6" | 45,000 lb | 10' |
| Double drop 48' — 29' well Tall freight that is lifted on (crane/forklift) — cargo up to ~11'8" stays legal height. | Double drop | 29' | 1'10" | 52,000 lb | 11'8" |
| Double drop 53' — 33' well Longer well for tall loads up to 33' long. | Double drop | 33' | 1'10" | 51,000 lb | 11'8" |
| Extendable double drop — 29'–45' well Well stretches past 33' for long, tall freight; trailer gets longer as the well extends. | Double drop | 45' | 1'10" | 46,000 lb | 11'8" |
| Low pro double drop 48' — 29' well Well ~6" lower than a standard double drop (1'4" vs 1'10") — tall freight up to ~12'2" at legal height. | Low profile | 29' | 1'4" | 49,000 lb | 12'2" |
| Lowboy fixed neck — 24' well / 2'0" Fixed-gooseneck lowboy, loads over rear ramps. Compact construction equipment. | RGN / Lowboy | 24' | 2' | 52,000 lb | 11'6" |
| Lowboy fixed neck — 26' well / 2'0" Fixed-gooseneck lowboy, loads over rear ramps. Construction equipment — about 40,000 lb legal, up to ~52,000 lb with permits. | RGN / Lowboy | 26' | 2' | 52,000 lb | 11'6" |
| Low pro lowboy fixed neck — 24' well / 1'6" Low pro lowboy — deck 6" lower than standard (1'6" vs 2'0"). | Low profile | 24' | 1'6" | 49,000 lb | 12' |
| 5 axle RGN 48' / 2'0" (1-2-2) — 26' well Shorter-well RGN for compact drive-on equipment. | RGN / Lowboy | 26' | 2' | 52,000 lb | 11'6" |
| 5 axle RGN 48' / 2'0" (1-2-2) — 29' well Drive-on equipment — about 40,000 lb legal, up to ~52,000 lb with permits. | RGN / Lowboy | 29' | 2' | 52,000 lb | 11'6" |
| 6 axle RGN 48' / 2'0" (1-2-3) — 29' well Mid-size excavators, dozers, loaders. | RGN / Lowboy | 29' | 2' | 65,000 lb | 11'6" |
| 6 axle RGN 53' / 2'0" (1-2-3) — 32' well Longer well for longer machines and tall freight up to 32'. | RGN / Lowboy | 32' | 2' | 62,000 lb | 11'6" |
| Stretch RGN 6 axle (1-2-3) — 29'–45' well Extendable well for long equipment, beams and tanks that must ride low. | RGN / Lowboy | 45' | 2' | 58,000 lb | 11'6" |
| Low pro RGN 48' / 1'6" (1-2-2) — 29' well Low pro RGN — well 6" lower than standard (1'6" vs 2'0"), usually on low-profile tires. | Low profile | 29' | 1'6" | 49,000 lb | 12' |
| Low pro RGN 48' / 1'6" (1-2-3) — 29' well 3-axle low pro RGN for taller mid-size equipment. | Low profile | 29' | 1'6" | 62,000 lb | 12' |
| 7 axle RGN 50' (1-2-3-1 stinger) Heavier equipment, better axle spread. | RGN / Lowboy | 30' | 2' | 73,000 lb | 11'6" |
| 8 axle RGN 53' (1-2-4-1) Large dozers and excavators. | RGN / Lowboy | 30' | 2' | 83,000 lb | 11'6" |
| 9 axle RGN 60' (1-3-4-1) Very heavy machines; usually superload in some states. | Heavy haul | 32' | 2'2" | 92,000 lb | 11'4" |
| 13 axle multi-axle RGN (1-3-2-4-3) Transformers, mining equipment. Engineering & route surveys. | Heavy haul | 32' | 2'4" | 150,000 lb | 11'2" |
| Beam / Schnabel / perimeter trailer Engineered superload moves — pressure vessels, transformers. | Specialized | 40' | 1'6" | 400,000 lb | 12' |
Not sure? Describe the cargo in the finder above, or send it to dispatch and we'll pick the trailer and price the permits.
